13-The relation between Block shear and coped beams.
Introduction to block shear and coped beams, why do we need to use coped beams? what are the different names for the cut in a coped beam, the cases for UBS?
Maged kamel
40- Easy Design of steel section for continuous beam-4-4
The steel section for continuous beam is based on the maximum value of the moments according to the 0.90 rule. The design is made according to the ASD.
12a-Solved problem 4-6-block shear for a C-Channel-2/2.
Block shear for a C-Channel-2/2. In the post, we continue to estimate the gross areas for shear and finally get the ultimate load.
12-Solved problem 4-6-block shear for a C-Channel-1/2.
A Solved problem 4-6-P-ult with block shear. It is required to check the adequacy of a given C channel bolted to a plate against a given ultimate load.
11-A Solved problem 4-4, Pult without block shear.
Solved problem 4-4, how to check the adequacy of a channel connected to a gusset plate under a given tension load? first case neglecting block shear.
2b- Solved problems for quadratic interpolation
Solved problems for quadratic interpolation. In both two solved problems three points, are given and used to get the quadratic interpolation function.
8-Complements of a set, Cumulative, associative of sets.
The complement of a set, cumulative, associative distributive properties of sets, What are the ordered pairs? solved examples are included.
39-Solved problem 10-1-use three-moment equations 3/4
The three-moment equations for steel continuous beams to estimate the moment values at the different support joints A, B, C, D .